Set contains tools to repair M6 x 1.0, M8 x 1.25 and M10 x 1.5 thread sizes. Ideal for restoring damaged threads in steel, cast, iron and aluminium.Suitable for engine repair and other automotive applications.Simple and easy to use;Drilling clear the damaged threads with a standard drill (included). (to repair a spark plug thread no predrilling is necessary if using the special spark plug tap), please pay attention that for flute less taps bigger holes are required.Check that the thread and pitch of the tap and the bolt matchTapping use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)Install the insert place insert on installation tool and position the adjustable ring so that the insert tang is centred in the tang slot. Wind the insert in with a light downward
Set contains tools to repair M6 x 1.0, M8 x 1.25 and M10 x 1.5 thread sizes.
Ideal for restoring damaged threads in steel, cast, iron and aluminium.Suitable for engine repair and other automotive applications.Simple and easy to use;Drilling clear the damaged threads with a standard drill (included). (to repair a spark plug thread no predrilling is necessary if using the special spark plug tap), please pay attention that for flute less taps bigger holes are required.Check that the thread and pitch of the tap and the bolt matchTapping use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)Install the insert place insert on installation tool and position the adjustable ring so that the insert tang is centred in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Don't work against the thread direction as the tang could breakTang removal After finishing lift the installation tool and use the tang break tool to remove the tang. For bigger sizes and spark plug taps use long nose pliers to remove the tang. Due to the narrow and exact tolerances the new thread normally is stronger than the original ones.
Contains:
3 x Taps
3 x HSS Drills
3 x Breaking Pin Tools
3 x Installation Tools
1 x Hex Key
75 x Thread Inserts Assorted.
Sizes:
M6 x 1.0 x 10.8mm
M8 x 1.25 x 10.8mm
M10 x 1.5 x 13.5mm
BlueSpot 131pc Thread Repair Kit Helicoil Set Restore Replacement Tool
88 pcs M6 M8 M10 Car Engine Block Restoring Damaged Thread Repair
US PRO 130PC Thread Repair Kit M5 - M12 2605
131 Pcs Thread Repair Tool Engine Block Restoring Damaged Kit M5
US PRO Tools Brake Caliper Thread Repair Kit with Threaded Inserts
US PRO Tools Auto Trim & Moulding Removal Set Non Marking Panel Popper
88 Piece Thread Repair Recoil Insert Kit Drill Tap Car Garage
Thread repair kit M6 x 1.0
HELICOIL THREAD REPAIR service. Metric, imperial and spark plug
25pcs Car Pro Coil Drill Tool Metric Thread Repair Insert Kit M9
Set Metric Heli-Coil Insert Automotive Threading Tools
US PRO Tools 88PC Thread installation and repair kit helicoil set M6
Tools for metal work and engineering, provided by AB Tools Online