Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.
Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap.
Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20.
Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads.
The Chip Clip clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.
3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws.
Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.
Product Weight: 11.10oz (314g)Product Dimensions (WxLxH): 2.50 x 1.00 x 10.75in (63 x 25 x 273mm)
Universal Speedball Monitor Mount is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end and one double-ball clamp. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly.
Universal Speedball Monitor Mount by MID49
Universal Speedball
is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension
Universal Speedball Monitor Arm (3 Inch)
MOUNT PRO Triple Monitor Desk Mount - Articulating Gas Spring Monitor Arm, Removable with Clamp and Grommet Base - Fits 13 to 27 Inch LCD Computer Monitors, VESA 75x75, 100x100 : Electronics
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
Universal Speedball Monitor Arm (3 Inch)
【Universal Monitor Compatibility 】 This monitor mount for 3 monitors can fit most flat/curved screens up to 40 inches and 25 lbs (11.3 kg). VESA
Triple Monitor Mount - Adjustable 3 Monitor Desk Mount, Triple Monitor Stand for Screens up to 40 Inches Within 25 lbs, Monitor Arm for 3 Monitors
Ergotron HX Triple Monitor Arm
MOUNT PRO Triple Monitor Mount, 3 Monitor Desk Mount for There Screens up to 32 Inch, Full Motion Gas Spring Triple Monitor Stand, Heavy Duty Monitor Arm Hold up to 17.6lbs
Universal Speedball Clamp Only
