Hi, has anyone tried to flash the Shelly 1 with WLED and use it as a controller? I would like to use it as a controller for a 12V Stripe, because I can feed it directly with 12V. Here is the information I found about the PIN-Out: I had planned to connect the data line via the SW terminal (GPIO 5) with a resistor to the Shelly. I mean somewhere times have read that this has already been implemented, I find the contribution unfortunately no longer. Greetings Freund der Nacht
Contact – DrZzs
Ready to go controller for WS2812B powered by WLED and type-C connector. Pre-flashed.
Pixel (addressable) WLED controller A1-SLWF-02 LED
My Modified LDO 300 kit build log - updated all the time, Page 2
My Modified LDO 300 kit build log - updated all the time, Page 2
Flash WLED to ESP8266 Based Controllers : 7 Steps - Instructables
Wled Setupsmart Zigbee 3.0 Rgb+cct Led Controller - Compatible With Alexa & Google Home
Compatible LED strips - WLED Project
WLED DMX Output –
Looking for RGBW controllers with good HA integration - Hardware - Home Assistant Community
Home Assistant: Controlling Addressable LEDs like any other light! (WLED integration)
Shelly1 - Relay Switch 12VDC / 230VAC WiFi 16A - Botland - Robotic Shop
WLED - Mit überschaubarem Aufwand zum perfekten LED-Controller
Shelly Smart Relay - Automation Modules - AliExpress
Setup WLED in 45 Seconds! NO TOOLS NEEDED - WLED for Beginners - 2023