Pro Audio XLR Female to RCA Male Cables - Custom Cable Connection

Made from twisted pair audio cable under an aluminum foil for maximum shielding from noise. High flexibility, 6mm PVC jacket reduces the risk of cables kinking and damaging the conductors. Bright nickel plating on solid brass XLR connectors resists wear from reconfiguring and moving equipment from one venue to another.
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors

Assembled in Dallas, TX by Custom Cable Connection

Pinout

Tip : Red

Ring : Blue

Shield : Shield

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.

Typical Applications:

Audio connections between multimedia devices.

Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.

Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc

Features:

2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire

3.5mm Male Stereo Solder Plug, Nickel plated with strain relief

1/4 Plug with 3 Conductor Nickel Shell Solder Contacts

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.

The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210

24-gauge bare copper conductors

Connectors: XLR Male Plug to XLR Female Jack

Rugged Nickel Plated XLR Connectors with Strain Relief

Neutrik NC3MXX and NC3FXX Connectors

Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.

PVC Black Jacket

Shield: Bare annealed copper

Capacitance: 21 pF/ft. @ 1 kHz

Characteristic Impedance: 70 Ohm NOMINAL

D.C. Resistance @ 20°C: 23 Ohm/1000'

Neutrik Connectors: NP3RX and NYS228

Assembled in Dallas, TX by Custom Cable Connection

Don't see the length you are looking for, we will build it for you!

For a custom length quote, call: 866.770.3207 or email: sales@

Made from twisted pair audio cable under an aluminum foil for maximum shielding from noise. High flexibility, 6mm PVC jacket reduces the risk of cables kinking and damaging the conductors. Bright nickel plating on solid brass XLR connectors resists wear from reconfiguring and moving equipment from one venue to another. Gold plated brass RCA connectors provide maximum signal transfer while eliminating oxidation. Spring strain relief on the RCA plug and a chuck strain relief inside the XLR reduce the effects of age on the solder joints and contacts.

Features:

• 24AWG Twisted Pair construction
• Foil shield and 60% copper braid
• Neutrik Nickel plated brass XLR connector
• Gold palated brass RCA connector
• Connect tape decks, CD/DVD players to mixing consoles and amplifiers
• Made in the USA

Coluber Cable Balanced Right Angle XLR Female-RCA Male 3-Pin Audio Connector

100 Foot Pro Audio Neutrik XLR Female to Neutrik RCA Male Cable by Custom Cable Connection - Yahoo Shopping

3 Pin XLR Male to 1/4 TS Unbalanced Mono Cable - Custom Length Color – Coluber Cable

XLR Audio Cable with Male Right Angle to Female Straight Neutrik Conne - Custom Cable Connection

Unbalanced XLR Female to 3.5mm TRS Audio Cables with Neutrik Connector - Custom Cable Connection

KING KABLE Balanced Microphone XLR Cable Custom Cord Using Canare L-4E6S Wire and Neutrik Gold

Pro Audio XLR Female to RCA Male Cables - Custom Cable Connection

Manual Welding Audio Power Xlr Male To Female Microfone Wire Professional 3.5 Jack Microphone Cable 6.5 Rca Speaker Cable - Audio & Video Cables - AliExpress

6 FT Technical Pro Microphone Cable XLR Female to RCA Male Plug Audio 18 GUAGE.

Right Angle 3-Pin XLR Male - RCA Unbalanced Mono Cable Custom Length, – Coluber Cable

6 Foot Custom Cable Connection Pro-Audio XLR Balanced Microphone Female to Blunt 18 AWG Economy Shielded Install Cable : Musical Instruments

Pro Audio DJ 20' ft XLR Male to XLR Female Red Microphone Speaker Cables 4 Pack

Right Angle 3-Pin XLR Female to RCA Male Unbalanced Cable - Custom Length, Color